[ceph-users] iSCSI: tcmu-runner can't open images?
jdillama at redhat.com
Thu Nov 2 18:44:02 PDT 2017
On Thu, Nov 2, 2017 at 11:34 AM, Matthias Leopold <
matthias.leopold at meduniwien.ac.at> wrote:
> i'm trying to set up iSCSI gateways for a Ceph luminous cluster using
> these instructions:
> When arriving at step "Configuring: Adding a RADOS Block Device (RBD)"
> things start to get messy: there is no "disks" entry in my target path, so
> i can't "cd /iscsi-target/iqn.2003-01.com.redhat.iscsi-gw:<target_name>/disks/".
> When i try to create a disk in the top level "/disks" path ("/disks> create
> pool=ovirt-default image=itest04 size=50g") gwcli crashes with "ValueError:
> No JSON object could be decoded" (there is more output when using debug but
> i don't think it matters). More interesting is /var/log/tcmu-runner.log, it
> says consistently
> [DEBUG] handle_netlink:207: cmd 1. Got header version 2. Supported 2.
> [DEBUG] dev_added:768 rbd/ovirt-default.itest04: Got block_size 512, size
> in bytes 53687091200
> [DEBUG] tcmu_rbd_open:581 rbd/ovirt-default.itest04: tcmu_rbd_open config
> rbd/ovirt-default/itest04/osd_op_timeout=30 block size 512 num lbas
> [DEBUG] timer_check_and_set_def:234 rbd/ovirt-default.itest04: The
> cluster's default osd op timeout(30.000000), osd heartbeat grace(20)
> [DEBUG] timer_check_and_set_def:242 rbd/ovirt-default.itest04: The osd op
> timeout will remain the default value: 30.000000
> [ERROR] tcmu_rbd_image_open:318 rbd/ovirt-default.itest04: Could not open
> image itest04/osd_op_timeout=30. (Err -2)
The error is that ceph-iscsi-config has instructed tcmu-runner that the
name of the image is "itest04/osd_op_timeout=30". We changed the delimiter
for separating optionals from "/" to ";" and that is what your version of
tcmu-runner is expecting. Upgrade to the latest available version of
ceph-iscsi-config from here .
> [ERROR] add_device:496: handler open failed for uio0
> in the moment of the crash. The funny thing is, the image is created in
> the ceph pool 'ovirt-default', only gwcli/tcmu-runner can't read it. The
> "/disks" path in gwcli and the "/backstores/user:rbd" path in targetcli are
> always empty.
> I haven't gotten past this, can anybody tell me what's wrong?
> I tried 2 different tcmu binaries, one self compiled from sources from
> https://github.com/open-iscsi/tcmu-runner/tree/v1.3.0-rc4, the other rpm
> binaries from https://shaman.ceph.com/repos/tcmu-runner/ (ID: 58311). The
> error is the same with both versions.
> My setup:
> - CentOS 7.4
> - kernel 3.10.0-693.2.2.el7.x86_64
> - iscsi gw co-located on a ceph OSD node
> - ceph programs from http://download.ceph.com/rpm-luminous
> - python-rtslib-2.1.fb64 installed with "pip install"
> - ceph-iscsi-config-2.3 installed as rpm compiled from
> - ceph-iscsi-cli-2.5 installed as rpm from https://github.com/ceph/ceph-i
> thx a lot for help
> ceph-users mailing list
> ceph-users at lists.ceph.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the ceph-users